-
By means of Programmable Logic Controller (PLC), system performance is based
upon the characteristics of various Metal sheets, and switches Hihg / Low
speed operating mode quaomatically, so as to achieve improved efficiency and
reduced maintenance dramatically.
-
For lower malfunctioning, the material uncoiler uses an expand / shink
hydraulic cylinder that is mounted on an integrated steel frame.
-
The materialuncoiler is equipped with a high efficiency disctype brake, its
tension is adjusted by the air-pressure loop. Under this circumstance, the
time for tension adjustment is reduced, also, the forced monetary braking is
occurred thus free from loosen of coil.
-
The pre-loader is equipped with DC various-speed motor drive, so that a
synchronized speed copperate to the production line could be governed.
-
Slitting Knives are mounted on an integrated frame with a sepreated
transmission, that means enhanced rigidity structure of machine, lower
vibration amplitude of Knives, and excellent yields could be produced.
-
The datum plane and accuracy of Slitting Knives' axes are all to be
fabricated within 0.006mm. in tolence,so that makes higher duration of
Slitting Knives and much excellent accury of outputs of the Slitting Line.
-
For securing the stability of Slitting Line during operation, the tension
controlled roll-up device with slip-differential structure is designed for
the waster.
-
The straight type tightener uses high elastics and resistive carpet as
surface materials, so keep the outputs of the Line smoother. In addition, it
also equipped a pressure-balance device to keep an even-pressure overthe both
side of materials that touched with the tinghtener.
-
The Recoiler is equipped with an improved / high rigid holder, that causes
reduced of lead time. An air-pressure adjustable back-pressure device is
equipped on the separator mechanism, so that a constant hold-pressure could
be reached for recoil.
-
.Self-tension design enable to retain a better tightness during recoil.
-
We make slitting line and levelling machine of 0.18-25mm thickness to width of 100-2500mm. Contact samway for more with your unique requirments.
